Category: Uncategorised

Plugged & Re-established the holes in the Ibanez RG body to correct the misaligned tremolo unit. Over the years the tension of the strings /springs had made the bass side stud lean forward because the hole in the body had gone oval. Plugged & re-drilled both sides to correct alignment also cleaned up the knife […]

Jackson Dinky service/setup. Looked like we were all done then noticed the push/push pots were not both latching as they should leaving you in tapped coil mode. Not good if you were playing live 😭 Replacements are going to be a pair of push/pull A500k. #guitartech #bridgnorthbusiness #shropshirebusiness #audiorepair #guitarrepair #guitarsetup #guitarservice #jackson #jacksonguitarsofficial #jacksonguitars […]

The Musicman Silhouette serviced & restrung with D’Addario 10-46, intonation adjusted, electrics serviced & a new socket installed. Action is already super low & relief is minimal. Frets are worn with a few marks but they don’t appear to affect playability at the moment, a refret probably isn’t far away. Bridge was stripped, cleaned & […]

Ernie Ball Musicman Silhouette @shrop.rock.doctor today for a service /setup. Possible pickup issue to be investigated & jack socket replacement required. #guitar #guitarrepair #guitartech #bridgnorthbusiness #guitarsetup #guitarservice #shropshirebusiness #electricguitar #ernieball #ernieballguitars #ernieballsilhouette #guitarwiring View this post on Facebook

Progress on the Columbus bass transformation to fretless. Other issues to be addressed while dismantled are the grossly misaligned strings to neck centre & the failed pickup replacement. The neck is now de-fretted & inset with maple strips, fingerboard leveled and oiled. Headstock was sanded to remove the Columbus logo & will now be refinished […]