Fender Telecaster with new pickup selector installed,pots cleaned, frets polished & restrung with D’Addario XL10-46. Customer requested that the string height remain as supplied but intonation was corrected. #bridgnorthbusiness #shropshirebusiness#guitartech #guitarrepair #guitarsetup #guitarservice #guitar #fender #fendertelecaster #guitartech #fenderguitars #dadarriostrings View this post on Facebook

Vonyx SPJ1200-A dropped off today with a non functional 12″ driver. Checking the cone for impeded movement, usually a sign of voice coil damage, it was apparent that the cone could not move freely. As the unit powered correctly & passed sound from the HF unit the amplifier board showed as functional. Connecting one of […]

The Laney GH50L head brought in non functioning with only one output tube having a working heater filament, now has a new pair of ceramic octal bases. The EL34s installed by the owner were a new matched pair. The switch on the rear for EL34 / 6L6 bias was in the correct position for the […]

The Pioneer XDJ-700 has now had the cue & play button actuators & the micro switches below replaced. Quite expensive parts at a fraction under £30 for a plastic molding & a pair of 50pence micro switches 😔 but an essential repair for the unit to be used reliably. Apparently a very common issue arising […]

The Pioneer XDJ-700 is now disassembled revealing the root cause of the issue being a broken button actuator molding. A quick Google search for a replacement reveals this to be an extremely common issue & not only on this particular model. The switches appear to be functioning correctly but dripped a spot of switch cleaner […]

Fender Precision in for a service /setup & restring. Reduced the neck relief by 0.020″, levelled one high fret, polished frets, checked out electrics & restrung with Rotosound 45 – 105 as requested. Setup string heights to fingerboard profile 9.5 & corrected intonation. Owner questioned output balance between pickups but I think it is correct. […]

Laney GH50L 50w master volume head brought in with a complaint of drastically reduced output & even though the owner had installed a brand new pair of JJ EL34s the issue wasn’t resolved & had noticed the heater filament in the second tube was not glowing. Removing the chassis & checking voltage at the rear […]

Something a little different on the bench today, an Epson EMP-X3 Projector. Not sure this repair is economically viable as there doesn’t appear to be much monetary value in this device today but the owner wants a diagnostic with a view to repair. Arrived non powering with a blown 3A fuse in the plugtop. Changing […]